Installation Instructions. COMPONENT IDENTIFICATION. A. Installation Guide (Template). B. TOT-LOK Assembly (w/plunger). C. TOT-LOCK Key. D. Striking plate. The install instruction are pretty good and the template aligns things well for the most part, but installation could be intimidating for some. They are cheaper Drill the big hole first, then fit the lock in and use it as a guide to drill the pilot holes. If you don't have a 9/32" bit for the big hole, you can use a 1/4 Configuring Cisco Catalyst 2960 Switch. Next, we configure a switch so that it integrates with PacketFence using 802.1X. In our example, we will use a Cisco A. Installation Guide 1-Phillips Screwdriver (Template) 1-Punch or Nail B. TOT-LOK Assembly 1-Power Drill (w/Plunger) 1-7mm or 9/32" Drill Bit The required fee payment and a completed FCC Form 159 ( Remittance Advice ) must be delivered to the Commission's lock box bank in PittsburghTot Lok Installation Guide Template installation guide template doc, free software installation guide template, hardware installation guide template, 38 % rogol -66.co IOS *** oss un 11 81180 , CA 37 F101150 HS Bio 39 FOTOSESAM 附: 28 # tot . 9. In a nozzle , the combination