SEKO Tekna TPR 603, Digital Model with FPM Seal - Digital dosing pump with pH/Redox control meter on board. PT100 probe input (thermal - Manual priming valve. - Case made in PP reinforced with fiber glass. IP65 rated. Model: SEKO Tekna TPR.603.N.H.H..000; Product 103/114. Características técnicas de la bomba dosificadora TEKNA EVO TPR 603. Caudal constante hasta 8 l/h. Ver tabla. Carcasa fabricada en PP (polipropileno)reforzada con fibra de vidrio, protección IP65. Kit de instalación en PVC (poliflouro de vinilideno) (válvula inyección, filtro de pie y soporte) Tubo de aspiración PVC. evo Inventory Reduction Reduce spares stock holding 4 models that cover 1 to 60 lt/h with an output pressure up to 20 Bar 1 Casing allows skids to be pre-constructed, as the fixing points remain constant, and the pumps can be selected on confirmation of the dosing flow flow rate from 20 to 60 lt/h flow rate from 1 to 20 lt/h evo Clever TEKNA EVO TPR INSTALLATION MANUAL - EN. EM00136063 rev. 2.2 EN 2 Control Panel - TEKNA TPR Access to the programming menu meaning that it confirms entry to the various menu When pressed during the pump operation phase, it cyclically displays the programmed values on TD_Tekna EVO_APG_Series_rev.0. 2 HYDRAULIC CHARACTERISTICS . 500 - 600 - 603 - 800 803 . 4 of 4 DOSING PUMP Tekna EVO APG SERIES - Solenoid dosing pump Technical data can be changed without notice. TD_Tekna EVO_APG_Series_rev.0. 2 . INSTALLATION KIT . PVDF . PVDF-T . PVDF foot filter PVDF injection valve Características técnicas de la bomba dosificadora TEKNA EVO TPG 603. Caudal constante hasta 8 l/h. Ver tabla. Dos frecuencias de funcionamiento (0-20% y 0-100%), con led indicador. Válvula de purga manual. Carcasa fabricada en PP (polipropileno)reforzada con fibra de vidrio, protección IP65. DOSING PUMP Tekna EVO TPG SERIES - Solenoid dosing pump Technical characteristics Flow rates: from 0.4 to 54 l/h Max back pressure: up to 20 bar Power supply: Stroke rate: from 120 to 300 strokes/minute Pump head: PVDF Diaphragm: PTFE External Enclosure: PP reinforced with fiber glass protection degree IP65 Manually priming valve Installation kit: Included Seko Tekna EVO TPG Series is the TD_Tekna EVO_APG_Series_rev.0. 2 DOSING PUMP TEKNA APG SERIES - Solenoid Dosing Pump PUMP KEY CODE N 100÷240 Vac H A I A Pump head with automatic degassing valve. Only for 603 and 800 series H PVDF P PVDF-T 0 FPM 1 EPDM 2 Elastomer Free 000 standard Field 7 APG 603 N H H 0 000 Field 1 Field 2 Field 3 Field 4 Field 5 Field 6 Field 4 liquid Pressure: up to 20 bar (290 psi) Stroke rate: up to 300 strokes/minute. Wetted part materials: PVDF, PTFE, EPDM, FPM, ceramic and AISI 316 (ATEX) Power supply: 100-240 VAC 50/60 Hz. Analogue input: 4-20 mA. Ingress protection: IP65. ATEX classification: CE Ex II 3GD | Ex ic nA IIB T4 Gc | Ex tc III CT120°C Dc IP65. Tekna Series is the range of innovative electronic metering pumps that SEKO has designed following many years of experience Analogue dosing pump with constant flow rate with manual adjustment by control dial on the front panel < Two frequency range (0÷20% or 0÷100%) 603 and 800 models Priming-aid Priming issues may occur with SEKO Tekna TPG 603, Digital Model with EPDM Seal - Constant flow rate manually adjustable, proportional flow rate according to an external analog (0/4-20 mA or 20-4/0 mA) or - Manual priming valve. - Case made in PP reinforced with fiber glass. IP65 rated. Model: SEKO Tekna TPG.603.N.H.H.1.000; The evolution of the electro