This item: Scantronic 9427 Remote Keypad. £42.95. In stock. Sent from and sold by Central Southern Security Ltd. £4.48 delivery. Scantronic 9448 Alarm Panel. However, neither the authors nor Scantronic accept any liability for loss or damage caused or alleged to be caused directly or indirectly by this book. The contents of this book are subject to change without notice. The keypad on the control panel and 9427 provide the following keys: O Used to set the panel with individual zones tempo An additional 6-zone remote keypad designed to be compatible with 9448-90 and 9448UK-60 control panels by Scantronic. 4 wire keypad higway connection. Star of daisy chain configuration. Two-key PA facility mimics the control panel option. Tactile, illuminated hard wearing keys. Scantronic Eaton 9427 LED Keypaf for use with 9448-90 & 9448-95 Control Panels. 9427EUR-80, Remote Keypad for use with 09448EUR-90/95 and 9448-90 and 9448UK-60 control panels. Main Features 10 LED display including "DAY" system status LED (DAY LED does not work with 9448UK-60). 4-wire keypad highway connection. Star of daisy chain configuration. keypad displays a special four digit code. Report this code to the central station, who then give you another code to let you to reset the system. Have a pencil and paper ready to note down the code. 1. Key in your user code to silence the bells. The display shows the zone and Service LEDs ON. 2. Key in your user code again. Just be careful not to disturb any other terminals, etc. as the panel will be completely powered down per the instructions. I have a scantronic alarm keypad all white 9427. The download manual does not cover this model, only a black keypad. I wish to set alarm exit time to longer period. keypad. See page 17 for more details. Keypads Your alarm system will have at least one, and possibly more, keypads located around the premises. From the keypad you can set and unset the alarm system, and also program and test it. The keypad may also include a proximity tag reader, which allows you to use a tag in place of an access code. the scantronic 9247 is the keypad for your alarm panel. scantronic 9427 alarm instructions scantronic 9427 alarm instructions works on ip xp pro and ubuntu 8. 496328 issue 2 3 of/ 9448es technical specification outputs bell, strobe, o/ p and aux are open collector transistor outputs. all instructions given in this manual refer to software The keypad displays the digits of the date and time one by one on the zone and tamper LEDs. The keypad sounder beeps each time the system shows a new digit. The EE zone LED represents "1" and the Tamper LED represents "9". If all LEDs are off when the keypad beeps then the digit "0" (zero). When the keypad has completed showing the date Open the keypad and identify the four position DIP switch on the keypad pcb, see Figure 1 below. Note that each switch is numbered 1 to 4. The numbers correspond to the keypad address. Figure 1. Keypad Address Switch 3. Select one switch and move it to the ON position (up). Make sure all the other switches are OFF (down). The keypad now has the