MSS SP-75-2008 Specification for High-Test, Wrought, Butt-Welding Fittings (incorporated by reference in 49 CFR §195) MSS SP-75-2019 High-Strength, Wrought, Butt-Welding Fittings (MSS SP-75-2019 edition is PROPOSED to replace currently referenced 2008 edition in 49 CFR §195) MSS SP-112-Comparator. Quality Standard for Evaluation of Cast Surface Finishes - Visual and Tactile Method. This SP must be used with a 10-surface, three dimensional Cast Surface Comparator, which is a necessary part of the Standard. 5/19/2019 - PDF - English - MSS. 3) Fittings - The recent editions of ANSI B16.9 and MSS-SP-75 require more rigorous testing with regard to the number of prototypes tested and test pressures used to measure the fitness of a butt-weld type fitting than the editions of ANSI B16.9 and MSS-SP-75 currently incorporated by reference into 49 CFR 195.118. MSS SP-43-2008 Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications Standard Practice Developed and Approved by the Manufacturers Standardization Society of the Valve and Fittings Industry, Inc. 127 Park Street, NE Vienna, Virginia 22180 Phone: (703) 281-6613 Fax: (703) 281-6671 Email: info@mss-hq.org Industry, Inc. (MSS) MSS-SP-44-1996 Steel Pipeline Flanges and MSS MSS- SP-75-2004 Specification for High-Test, Wrought, Butt-Welding Fittings. Post-incident findings were that in some cases the pipe and induction bend girth weld bevels were not properly transitioned and aligned during welding. In some cases, the girth weld 2008'' and add in their place the words ''NACE SP0204'' in each instance they appear. Issued in Washington, DC, on December 22, 2020, under authority delegated in 49 CFR 1.97. Alan K. Mayberry, Associate Administrator for Pipeline Safety. [FR Doc. 2020-28785 Filed 1-14-21; 8:45 am] BILLING CODE 4910-60-P MSS SP-75-2014 High-Strength, Wrought, Butt-Welding Fittings Covers factory-made, seamless and electric welded carbon and low alloy steel, butt-welding fittings for use in high pressure gas and oil transmission and distribution systems, including pipelines, compressor stations, metering and regulating stations, and mains. scope standard practice standard marking system for valves, fittings, flanges, and unions sp-25 requirements and may be shown on the body or an attached plate, at the option of the manufacturer. 2.6 manufacturers may apply markings indicating conformance with codes and standards such as api, asme, mss, awwa, on products that fully conform to the … Download PDF - Ansi Mss Sp 55 [wl1p6vqgkjlj]. STD-MSS SP-80-ENGL 1777 5770b90 0500873 373 = M S S S T A N D A R D P R A C T I C E SP-80. BRONZE GATE, GLOBE, ANGLE AND CHECK VALVES. O. PURPOSE. This MSS Standard Practice covers bronze gate, globe, angle, and check valves in Classes 125, 150, 200, 300 and 350 for threaded and solder ends and Classes.150 and 300 for flanged ends. MSS SP-75, High-Test, Wrought, Butt-Welding Fittings PHMSA proposes to incorporate by reference MSS SP-75-2019, "High-Test, Wrought, Butt-Welding Fittings," December 2019 into § 195.118(a). This MSS SP specifies requirements for factory-made, seamless, and electric-welded carbon and low-alloy steel butt-welding fittings. Download Mss-sp-97.pdf. Type: PDF. Date: November 2019. Size: 555.2KB. Author: Gowtham Venkat. This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report