xypex coating
xypex megamix 1
xypex problems
xypex mixing instructions
xypex coveragexypex concentrate
xypex crystalline waterproofing data sheet
xypex patch and plug

After the application of Xypex Concentrate, the active chemi- but rather is meant to give a general description of the installation practices and Using a trowel, mix one part clean water with six parts Xypex Concentrate powder by volume for 10 – 15 seconds. Lumps should be present in this mixture. Do notApply Xypex with a semi-stiff nylon bristle brush, push broom (for large horizontal surfaces), or specialized spray equipment. · The Xypex coating must be Xypex requires a minimum of 21 days of curing and crys- tal generation before the application of any paint or ep- oxy. Consult epoxy and paint manufacturer for Xypex Concentrate / Modified – Slurry Coat. Application Procedures [Note: These instructions should be read in conjunction with the relevant. Apply one coat of Xypex Concentrate slurry uniformly at the rate of approximately 0.8 - 1 kg/m2 for single coat or. 0.65 - 0.8 kg/m2 for 2 coat application and