The FLOWCON plus achieves permanent monitoring of the amount of fluid passing through a cooling duct, which gives it a decisive advantage. Disruptive factors, such as constriction of cooling ducts or fluctuations in pressure are detected and the flow is controlled proportionally using stepper motors instead of the old manual regulating valves. WITTMANN robots with R9 control system - Operation of robots via the machine's monitor screen - High-speed communication between machine and robot to synchronize movements - Important machine movements can be set via the R9 robot control system WITTMANN TEMPRO plus D temperature controllers Description. The scrap is gravity-fed directly from the processing machine, requiring no conveying or manual handling. Multi-position swivel outlet pipes make an easier connection to the flexible hose of the hopper loader. The regrind collection bins are made of stainless steel. The two model provide a pre-cutting knife on the auger tube pre At the Fakuma 2017, WITTMANN is introducing its TEMPRO plus D temperature controller with the newly developed SpeedDrive option. It consists of a motor speed-controlled pump, which offers users several additional options to make the injection molding process even more efficient. To start with, TEMPRO plus D controller offers WITTMANN's TEMPRO plus XL 90 can heat up even big molds within a short time to the required set point. Besides the strong heater (36 kW) we have reinforced flow (up to 200 l/min) and cooling capacity. Purge out of molds is supported by an additional pump which pumps the water to Manual filling • • - The Tempro plus D L120 was fitted with a ¾-inch proportional cooling valve that operates with a step motor and continuously opens or closes to maintain constant temperature control. WITTMANN TemPro Basic 90/150 Temperature control units. Price: 1.000 € Used Wittmann tool temperature control machine, TemPro Basic 90/150, for sale. Water, 9 kW, 90 °C. Category: 305 peripheral equipment (e.g. heating,cooling,drying) / Robots. Latest update: 01.03.2022 No.: 158167284. send inquiry tempro basic c200 manual wittmann chiller wittmann tempro plus 250 wittmann tempro basic c200 manual wittmann mold temperature controller wittmann tempro plus c manual 21 Jul 2014. Manual filling. •. •. •. Pressure gauge"No Seals" Design on Tempro plus 160° through magnetic coupling of pump TEMPRO plus customers obtain a range of WITTMANN's TEMPRO plus XL 90 can heat up even big molds within a short time to the required set point. Besides the strong heater (36 kW) we have reinforced flow (up to 200 l/min) and cooling capacity. Purge out of molds is supported by an additional pump which pumps the water to Manual filling • • -