when crosscutting, most table saw operators prefer to work on the ________ side of the saw blade.table saw parts identification test
table saw test answers
table saw safety test pdf
table saw safety test quizlet
table saw identification and safety worksheet
10 table saw safety rules
table saw safety rules osha

My inten- tions with this article are to focus on the techniques, methods and mechanics of safely using the table saw. After all, it is very well documented Keep the saw table and floor free of tools, wood stock scraps, sawdust, oil and grease. 6. Check the saw blade periodically for missing teeth and cracks. 7. Next, you'll learn the secrets of cutting tight-fitting joinery. We'll also show you some of our shop-tested techniques for making perfect cuts on the table saw G1022 Series Table Saws. Additional Safety Instructions For Table Saws. 1. THRU-SAWING: Use blade guard, splitter, and anti-kickback fingers on all thru-saw Safety Rules. • Safety glasses and hearing protection are required. • Never saw freehand. • Never clear small pieces while blade is moving. A tablesaw won't cut easily, accurately, or safely if it's improperly set up. So before making any rip- or crosscut, make sure the saw is in good working order TABLE SAW. 2000W 254mm. INSTRUCTION MANUAL. SPECIFICATIONS. Motor: 2000W (S6 40%) 1800W (S1). Input: 230-240V ~ 50Hz. No Load Speed: 4,250/min. Set up the saw on a firm,level,non-slip,vibration-free The rip fence slides on the saw table's front rail and rear rail. ADJUSTING THE MITER GAGE. PROVIDE ADEQUATE SUPPORT to the rear and the sides of the table saw for long or wide workpieces. 11. AVOID KICKBACKS (work thrown back towards you) by