Helpful overview of the basic operation for Rain Bird Inline sprinkler valves. Shop Rain Bird valves & parts: store.rainbird.com/valves.htmlHow to replace a residential valve solenoid when the valve does not turn on from the aut To activate the valve using the internalmanual bleed fea- ture, turn the solenoid handle counter clockwise 1⁄ 4to 3⁄ 4turn or until you hear water flowing through the valve. To close valve, turn the solenoid handle clockwise 1⁄ 4to 3⁄ 4turn and wait a moment for the valve to close. Only hand tighten the solenoid to close the valve. 7. Internal bleed for spray-free manual operation Accepts Rain Bird TBOS latching solenoid for use with most battery-operated controllers Operates in low-flow and Landscape Drip applications when a 200 mesh filter is installed upstream *Not recommended for use with two-wire control systems Specs Pressure: 15 to 150 psi (1,0 to 10,4 bar) Manual bleed - Turns the valve on manually by "bleeding" water off of the di- aphragm. External bleed models have a knob or screw to turn and the water sprays out of the top of the valve. Internal bleed models have a open/close knob or require a 1/ 4 turn of solenoid and water bleeds off inside the valve. c. Manual On/Off - Turn solenoid 1/ Rain Bird to ctmge product or of Rain Bird 0 2012 Rain Bird Rain Bird Division 6991 E Building AZ RainBird.com Working with Wires O Use watertight connectors/ gel caps and multi-strand direct burial wire Solenoid Vacuum Breaker Outlet PERT ADVICE 1-800-RAN BIRD rainbird.com I O Connect the common wire (usually white) from the Explore the Rain Bird Support Center to find manuals, literature and videos on current and discontinued Rain Bird products. Manuals & Literature Manuals & Literature DV and DVF Irrigation Control Valves Brochure - Long DV and DVF Irrigation Control Valves Brochure - Short DV and DVF Valves Manual - Multilingual DV Series Valves Tech Spec 3. Turn the valve solenoid about one-quarter turn in the "On" direction, which is counterclockwise. Cylindrical in shape, the solenoid is the uppermost part in the valve box, and it has wires It is operated solenoid valve manually operate automatically spraying water pump motor does provide a manual operation on a valve assembly. Indoor controllers attach to electrical outlets via a The Rain Bird valves are the type of controls that dictate the flow of water to either parts of the sprinkler system or to the entirety of the You can generally find instructions for controller operation inside on the inside panel that your controller came in. The solenoid is meant to act as a manual control so that the valve can be On the side of the solenoid, arrows indicate the on and off position. You need turn only 1/4 turn CCW to manually activate the valve using the solenoid. Since the solenoid seat is subject to system pressure, it may be difficult to turn in jigh pressure situations. Turn 1/4 turn CW to close the valve after flushing. Wiring the solenoid correctly ensures the correct valve is activated when turned on by the controller. 1. Unplug the Rain Bird control box so there is no power going to the valve wires. On the side of the solenoid, arrows indicate the on and off position. You need turn only 1/4 turn CCW to manually activate the valve using the solenoid. Since the solenoid seat is subject to system pressure, it may be difficult to turn in jigh pressure situations. Turn 1/4 t