power commander 3 manual pdf
power commander 3 usb cable

B078-101-USB-1, and B078-101-USB2 are the SIUs that will be used with the NetCommander UP KVM Switches. 1 .3 Target Server Compatibility. CS82U/CS84U 2/4-Port PS/2-USB KVM Switch User Instructions 2. Power Jack (spare). 3. Console Monitor Port. 4. KVM Port Section. Hardware Installation B. In these user instructions the media4Kconnect 3. USB to PC. 4. DVI in from PC. 1. power supply for 12V 2A on the back side 4K Multiview commander. 4K uLTRALINE uVX1/uVX1-F KVM EXTENDER. INSTRuCTION. MANuAL. Part.No: 6901 3. Connect both extender power cables ( 6 / 20 ) to an earthed wall socket. (If you power down one of the connected computers, it will automatically switch to the other one.) It comes with two USB3 male to USB3 male cables. These are Figure 3 NetCommander KVM rear panel. Rear View. Configuration (continued). Power Socket: The power cord plugs in here from the AC power source. The graphics card will either have 2 VGA ports, 2 DVI-D ports or 2 HDMI ports or even any combination of the 3. My card, for example, has 1 VGA, Power, Ground &Shield separated; DVI-D USB 2.0 KVM Extender; Resolution 1920x1200@60 Hz; Max. Distance 150 m/492 ft. in copper; Full HD videos in real time