This procedure grabs a trace from the scope and inserts into a wave. Multiple scopes may be accommodated, each with a fixed IPv4 address. Only tested on WinXP and LeCroy WaveRunner 104Xi, but other LeCroy scopes will probably work. Synopsis: LeCroyGetTrace (99, "C1", awave) // Scope has IP address of 192.168.1.99 The signals of the H-NG were measured using an electrometer (Keithley 6517 B, Tektronix, Inc., USA) and an oscilloscope (LeCroy HDO6104, Testwall Ltd., UK). A linear motor (LinMot E1100, LinMot Inc., USA) was used to provide the periodic external force applied to the H-NG (frequency of 2 Hz, operating distance of 30 mm, acceleration of 10 m/s 2 Combining Teledyne LeCroys HD4096 high definition 12-bit technology, with long memory, a compact form factor, 12.1 touch screen display, powerful measurement and analysis tools, and mixed signal capability, the HDO6000 is the ideal oscilloscope for circuit validation, system debug and waveform analysis. sensor and the FOC signals were acquired b y means of a 15-bit Teledyne LeCroy's HDO6104 . oscilloscope at 100 while the upper bound is provided by practical dif ficulties in the manual Calibration services by instrument type. Our experienced technicians and specialized equipment are ready to calibrate instruments of the following types: Avionics Calibration. Communications Calibration. Electrical / Electronics Calibration. Fiber Optic Calibration. Flow Calibration. Force Calibration. Gauge Calibration. The S-Boxes are realized as lookup tables and stored in the program memory of the ATMEGA. The S-Boxes are masked using the We used a LeCroy HDO6104 to record the power consumption of the ATMEGA with a resistor against ground. We recorded N traces of AES-128 appropriate values could also be estimated by manual analysis of the A Keithley 6517 electrometer (Beijing, China) was used to measure the open-circuit voltage, short-circuit current and short-circuit charge of the BPPW, and the data were obtained and recorded using an oscilloscope (LeCroy HDO6104, New York, NY, USA). A wireless motion monitoring system based on a BMD101 board was used to record data from the BPPW. View blame. % ReadLeCroyBinaryWaveform - read binary waveform file created by a LeCroy Oscilloscope. % waveform = LeCroyBinaryWaveform (FILENAME) loads the waveform file into the workspace variable W. % FILENAME can either be a variable or a string constant enclosed by quotes. %. We present a novel technique that uses ultrasound-driven microbubble streaming for automated positioning of single microparticles of arbitrary size and physical properties in microchannels. Article. Optimal parameter choice of CR-RCm digital filter in nuclear pulse processing. July 2019; Nuclear Science and Techniques 30(7) 30(7) Quality Program. Quality System; Metrology Expertise; Research and Operations Team; C3 Asset Management; Determining the Cost of Calibration; Measure Smarter; Lecroy SDA-820ZI-B USED FOR SALE Serial Data Analyzer Oscilloscope,20GHz,4-Channel. Order #: SDA-820ZI-B-USED : Mfg #: SDA-820ZI-B-USED Quality Program. Quality System; Metrology Expertise; Research and Operations Team; C3 Asset Management; Determining the Cost of Calibration; Measure Smarter; Lecroy SDA-820ZI-B USED FOR SALE Serial Data Analyzer Oscilloscope,20GHz,4-Channel. Order #: SDA-820ZI-B-USED : Mfg #: SDA-820ZI-B-USED The discharge current was measured using a LeCroy current probe (AP015, dc to 50 MHz ban