kantech kt-400 troubleshooting
kantech kt-400 programming
kantech kt-400 pricekantech kt-400 tech support
kantech kt-400 data sheet
kantech kt-400 default password
kantech kt-400 default ip
kantech kt-400 wiring diagram

KT-400 Ethernet Four-Door Controller Installation Manual. Pre-Installation Information. To the Installer: If you are familiar with the installation, Soft Reset: When JP2 and JP3 are ON, the controller will reset on a) power up, b) pushbutton, or c) EntraPass software 'Manual operator soft reset':. KT-400 is an Ethernet-ready four-door controller that provides 128-bit AES encrypted communication with the EntraPass Security Software and is a highly Reference Manual viii. Configuring a Kantech IP Link or a KT-400 Ethernet Connection Type 53. Configuring an Ethernet Polling Connection TypeKT-400 Ethernet Four-Door Controller Installation Manual. Pre-Installation Information. To the Installer: If you are familiar with the installation, Summary of content (44 pages). PAGE 1. KT-400 Ethernet Four-Door Controller Installation Manual DN1726-0811. PAGE 2 Verify your Network Configuration Information Sheet: • Enter the EntraPass IP address or the Domain name of the EntraPass Gateway. This information must be the