Ideal Logic 30 Combi Boiler. 350,00 £. Gas combi boiler in good working order Used but still in good working order and plenty. Ideal gas combi boiler. fileslib. What should the pressure be on a logic Combi 30? Check system water pressure is between 1 & 1.5bar on the system pressure gauge. To re-pressurise the system see Section 3. If the boiler still fails to operate then please contact Ideal (if under warranty) or alternatively a Gas Safe Registered Engineer if outside of the warranty period. How do you reset a logic Combi 30? To reset boiler, turn the mode control knob (D) to reset position and immediately turn knob back to required setting . The boiler will repeat the ignition sequence. If the boiler still fails to light consult a Gas Safe Registered Engineer or in IE a Registered Gas Installer (RGII).
AbraPol-10. Instruction Manual. 30. The tubes in use should be cleaned from time to time. AbraPol-10 is an automated machine ideal for laboratories or.
How do you use a logic Combi 30 boiler? The boiler condenses water from the flue gases when operating most efficiently. To operate your boiler efficiently (using less gas) turn the central heating temperature knob (B) to the ' ' position or lower . In winter periods it may be necessary to turn the knob towards the 'MAX' position to meet heating requirements.