Follow the instructions in the Earthmate app to complete the pairing and setup process. After the devices are paired, they connect automatically when they are turned on and within range. Testing the Device You should test the device outdoors before using it on a trip to ensure your satellite subscription is active. Select Test > Test. This manual provides instructions for using all of the functionality available on the Earthmate GPS PN-20. Most of the chapters are based on pages, which are the main screens on the Earthmate GPS PN-20. Each chapter describes the features of that particular page and the menu options that are available from that page. 1 From the app store on your mobile device, install and open the Earthmate app. 2 Place the inReach device and your mobile device within 3 m (10 ft.) of each other. 3 From the main menu, select Setup > Bluetooth > Pair Device. 4 Follow the instructions in the Earthmate app to complete the pairing and setup process. 1From the app store on your mobile device, install and open the Earthmate app. 2Place the inReach device and your mobile device within 3 m (10 ft.) of each other. 3On the inReach device, select Settings > Bluetooth > Pair Device > Pair Device. 4Follow the instructions in the Earthmate app to complete the pairing and setup process. Access the Earthmate menu system using the layer icon. When you enter the map management menu you'll notice there are a number of download options, including a digital map of the entire Earth. This manual provides instructions for using all of the functionality available on the Earthmate GPS PN-20. Most of the chapters are based on pages, which are the main screens on the Earthmate GPS PN-20. Each chapter describes the features of that particular page and the menu options that are available from that page. From your mobile device, open the Earthmate app. 2. For iOS devices select Options then Account & Sync. For Android devices select Menu then Settings and Account. 3. Make sure you've entered your email address and your Explore website password. 4. Select Sync. All of your Explore site contacts will now appear in the Earthmate app contact list. See both sets of instructions below. To Use the Earthmate GPS BT-20 with a USB Connection 1. Verify your mapping application is installed. 2. Plug the Earthmate GPS BT-20 device into a USB port on your laptop computer. 3. Configure the GPS device with the mapping application. Page 1 fa. Open the mapping application. When the manual instructs you to do something, use these actions on the device: To select an item on the screen, such as a field, check box, button, drop-down list, menu item, or search result—use the arrow keypad to move/scroll to the item to highlight it and press ENTER. » To edit alphanumeric fields, use the on-screen keyboard. DeLorme Earthmate PN-40 User Manual The Map Page Course Up is selected when navigating. Page 91 GPS signal. Once the map of the location is saved on the Earthmate PN, Tom leaves for his bird earthmatf trip. The coordinates for the current GPS location, cursor position,or map center in the primary format. The PowerPack for Earthmate GPS with Bluetooth has two LED light which each has two colors. One is GPS & Charge status LED, that is named LED 2, and the other is Bluetooth & low power status LED, that is named LED 1. The status table of LED shows as follows: LED1 Bluetooth & UART transmitting status Description Earthmate®app. The Earthmateapp allows you