The indicator can be placed on a tabletop or attached to a wall using the mounting bracket. The DS6150 scale base is constructed of heavy gauge steel ensuring a long life and the entire scale system is backed by a three year warranty. To ensure patient safety, the scale base is covered edge-to-edge with a non-skid material. DORIAN ECO Ceiling Fan Owner's Manual Model Numbers Net Weight: 16.3 Lbs. • Español - página 33 • Français - page 65 CF515BS00 - Brushed Steel CF515GRT00 - Graphite CF515ORB00 - Oil Rubbed Bronze READ AND SAVE THESE INSTRUCTIONS MODERN 1-800-777-4440 luminancebrands.com This manual will explain how to order parts or return an Index Drive to IMC for repair. IMPORTANT: The Bill of Materials listed in the model-specific service manual is for a standard unit. If you feel you have a special unit, or are in doubt, please use the procedures outlined in the "How to Order Parts" section. 5. There are many parameters that customize the control of manual and automatic transmission of data. Data can be transmitted via standard RS232, Ethernet, WiFi, Bluetooth or USB options. Contact Doran Tech Support at tech@doranscales.com for support. START Start currently loaded batch program. STOP Pauses or stops currently loaded batch program. 42/5",%3(//4).' 5nit$oes.ot3top)n0ositionor0ositioningis%rratic-akesureunitisindwell 4hisisthemostcommoncauseofproblemsincamindexers Note that keyways on the input (cam) shaft of Stelron index drives are aligned with one of the junctions of index (motion) and dwell (stop). Turn the camshaft until output movement stops then turn at least another 15 degrees. 2) Make witness marks on the dial or machine member that attaches to indexer output and the indexer output flange. Manuals: BT-10-30 Translator | BT-40-50 Translator. The STELRON Translator provides two independent linear axis of cam controlled movement. Any motion in a single plane (within the stroke and minimum cam angle limitations) is possible. The end plate, or output, is guided by precision linear bushings. The spread, or aspect ratio, of these A-2 Dorian Tool has a complete line of internal and external products for lathe work available in both inch and metric sizes. Choose from positive inserts or negative, steel shanks or carbide, or even between five different locking systems.