the method is a short way to tell how the ip address has been given to the interface: nvram -> saved config. manual -> configured after last reload. fileslib. 2) Method refers to how the current IP address of the interface was assigned: from the command line (manual), or startup-config (NVRAM), or automatically (DHCP) What are the steps to configure a VLAN? First, VLAN support needs to be enabled on the switch if it is not already: 1 Choose Switch configuration.
When you create a VLAN it's "manual," and after the switch is rebooted, VLAN changes to "NVRAM." 20 Helpful Share.
Assign a Switch Port to a VLAN ; Step 2. switchport access vlan vlan-id. Example: Router(config-if)# switchport access vlan 2. Router(config-if)#. Assigns a port