Example XML configuration file for Cisco IP Phones (models CP-7940 and CP-7960) - this site is part of an Asterisk server tutorial. Cisco 7940 User Name: Remember Me? Password: Register: FAQ: Members List: Calendar: Search: Today's Posts: Mark Forums Read: Voxalot Support Support for the Voxalot service. View First Unread Thread Tools: Display Modes: 08-23-2008, 01:07 AM # Provisioning of CISCO 79XX Series. Supported Models: Cisco 7940, 7941, 7960, 7961. Step 1: Download Firmware & Copy to Provisioning Directory. Step 2: Configure TFTP Server. Step 3: Configure the phone in 3CX. Step 4: Set the provisioning link using DHCP Option 66. Limitations. For example, SIP protocol for Cisco IP Phone 7906G and 7911G is supported only with Cisco Unified Communication Manager version 5.x and above. OS79XX.TXT This file tells the Cisco 7940/7960 which binary to download from the TFTP server. This file is case sensitive and must only contain the name of the file that you want to Cisco 7940/7960 IP phones can support either the Skinny Call Control Protocol (SCCP) to run with Cisco CallManager, the Session Initiation Protocol (SIP For example, for SIP the SIPDefault.cnf and SIPmac_address.cnf files are downloaded when a phone is reset. This file contains the image_version parameter that tells the phone which image to Converting a Cisco 7940/7960 CallManager Phone to a SIP Phone and the Reverse Process SIPDefault.cnf and SIPMacAddress.cnf is an extension already Make the edits in (SIP000943665383.cnf for this example) detailed in the following slides titled, "Key changes (from defaults) in: SIPmacaddress.cnf"- The Cisco 7940 was an early contender in the enterprise market for use with Cisco CallManager and never intended for home use, SIPDefault.cnf # Proxies proxy2_address: "callcentric.com" ; Can be dotted IP or FQDN proxy_register: 1 # NAT/Firewall Traversal (if needed for your install, not likely specific to Callcentric) nat_enable: 1; 0 I don't have a ton of experience with these but do have about 8 or so that successfully register, all from one LAN. PBX is cloud hosted. Here's an example for the MAC.cnf files I use: # Phone settings. phone_label: "Cisco7940G". proxy_register: 1. timer_register_expires: 300. preferred_codec: g711ulaw. enable_vad: 0. • SIPDefault.cnf • SIPMacAddress.cnf • dialplan.xml The SIPDefault.cnf file contains the default settings that will apply to all Cisco 7940 and 7960 SIP telephones. An example is shown in Appendix A with applicable parameters highlighted in bold. Following are the parameters that need to be configured: Cisco Parameter Description Cisco 7940/7960 IP phones can support either the Skinny Call For example, for SIP the SIPDefault.cnf and SIPmac_address.cnf files are downloaded when a phone Yet another Cisco 7940 SCCP to SIP firmware thread Yet another Cisco 7940 SCCP to SIP firmware thread. -rwxr-xr-x 1 ladmin ladmin 29 Dec 21 18:11 SIPDefault.cnf CISCO 7940 & 7960 SIP PHONE CONFIGURATION FOR CLEARSPAN AASTRA - 2813-001 PAGE 1 OF 32 SIPDefault.cnf System Contains configurable parameters that apply to all SIP.cnf Example: SIP0003E3630C94.cnf Subscriber Contains configurable parameters that apply to an individual device in a deployment. 5.2 System Level Configuration