2011-2014 Chevrolet Cruze Direct Fit LED DRL Daytime Running Light Installation Guide. You can find these products under Chevrolet Cruze Direct Fit LED Daytime Running Lights (70-729). 1) You will need to locate the tabs and screws that are holding the bumper on the frame. Once the screws and bolts are removed, you can gently move the bumper Chevy Cruze without Sport Package 2011, Factory Style Fog Lights by Spyder®, 1 Pair. Chrome housing, clear lens. Switch: included. Replace your damaged or non-functional fog lights with these top-notch Spyder Factory style fog lights that will help you see the road clearer and increase visibility in fog and inclement weather. Tackling replacement of the Fog Lights on your CHEVROLET will be a lot easier using the PDF instructions and video tutorials listed here. They were created by professional car mechanics. These manuals will help you deal with any issue you may encounter when changing the Fog Lights on your CHEVROLET. For anyone that wants to know an easier different way to install them here it is. What U will need. 2 Factory Fog Lamp Housings and Bulbs. Factory Fog Lamp Switch. AC Delco 4 pin Plug for back of the switch. 2 2pin H11 Connectors. 30 AMP 4 Pin Relay. Inline Fuse Connector preferably weather tight. How I Installed. Step 1 - Remove the factory bulb To change the stock bulb, all you have to do is hold the housing on each side and pull it out with your hands. You can also use a screwdriver to pry each side out. Then you can pull the bulb straight out of the housing, and remove the wiring harness. Figure 1. Removing fog lights. Step 2 - Install new fog light bulb FOG LIGHT for Chevrolet / Cruze. SKU: 5069412 UPC: 847245069412 Chevy Cruze 2011-2014 (does not fit Sport model) OEM Fog Lights w/switch - Clear; SKU: 5082855 INSTALLATION GUIDE TECH SUPPORT: PRODUCTS CRYSTAL HEADLIGHT PROJECTOR HEADLIGHT TAIL LIGHT FOG LIGHT: DEALER INFO WD APPLICATION: CONNECT US This is a pair of fog light, Switch and Harness is included with the package but instruction for installation will not be include Some of the package includes light bulbs, for package which does not come with any light bulbs, you can apply the stock light bulbs for installation. Some of the bumper may require cutting for installation. Step 2 - Replace the fog light bulb. You'll find the socket for the fog light bulb deep underneath where the headlight housing was. Reach down there and twist the socket loose and pull it out so you can change the bulbs. Just pull the old fog light bulb straight out of the socket, and insert the new bulb. It should snap into the socket. Bought a LED fog light kit from eBay and it didn't come with installation instructions. Have any of you installed a fog light kit on your Gen II -- I have the 2017 Premier Hatch if that changes anything. Anything would be appreciated! 2012 Chevrolet Cruze Alarm Install Instructions. Battery Constant 12v+ Positive Wire (+): Red/Green and Red/Yellow. Battery Constant 12v+ Positive Wire Location: At BCM Module in the Front Passenger Side of the Center Console (White 26-Pin Plug) Starter Positive Wire (+): Requires Interface Bypass Module. Starter Positive Wire Location: N/A. Headlight Diagram 1 Open the hood. Remove the harness retaining tab "A" On the top of the connector is a release tab "B". Press it and gently pull back. Don't use the wiring to pull. With the harness removed, twist