To exercise any of your rights, or if you have any other questions about our use of your personal data, please email info@qarad.com or call our office at +32 (0)14 49 04 22. You may also use these contact details if you wish to make a complaint to us relating to your privacy. 8) The total weight of the system (e.g. tray and instrument load) must not exceed 25 pounds. 9) The MiniFESS instruments should be prepared and sterilized according to the instructions for use, see Instructions for Use, (REF 2448-001 & 3103-001). DISINFECTION The tray is intended to be terminally sterilized. MAINTENANCE, INSPECTION AND TESTING Failure to follow the above directions when using these types of cleaners may void this product's warranty. Stretchers must have maintenance performed after a minimum of every fifth washing. See the maintenance manual for specific lubrication instructions. Do not use abrasive cleaners to clean the display enclosure for the optional scale system. Stryker Orthopaedics recommendations. In accordance with ISO 17664, two methods of cleaning Stryker Orthopae-dics reusable instruments are provided in these instructions: a fully manual method (see Manual cleaning section on page 7) and a method using an automat-ed washer-disinfector (see Automated cleaning section on page 8). Whenever 2009/12 6500-009-101 REV C stryker.com SMRT™ Power System Model 6500 Operations / Maintenance Manual For parts or technical assistance: USA: 1-800-327-0770 (option 2) Consult instructions for use. 6 6500-009-101 REV C stryker.com Return To Table of Contents Symbols and Definitions Stryker's System 8 family was developed by working closely with orthopaedic surgeons and hospital staff to deliver solutions to address the complex challenges of today's health care environment. Improved ergonomics give surgeons a better neutral wrist position, and textured areas help provide a firmer grip. Stryker ENT navigation system powered by Scopis software: 08: Visualization: FocESS image solutions: 10: FocESS sinuscopes: 11: Surgical instruments: Please see Instructions for Use (IFU) for a complete listing of warnings, precautions and adverse events. Caution: Federal (USA) law restricts this device to sale by or on the order of a Riser rings 8. Insert tray Assembling the EZout Tool Ensure the speed selector on the handpiece is in safe mode prior to assembly. a. Pull back the locking sleeve to insert the attachment into the handpiece. b. Turn the attachment rod to align the keyed feature of the attachment with the keyed feature of the handpiece. For assistance, contact Stryker. ALWAYS operate this equipment within the specified environmental condition values (Appendix I: Specifications). ALWAYS follow the recommended duty cycle to prevent this equipment from overheating. DO NOT stack or place equipment adjacent to the console. Hydraulic Oil Stryker Part Number 6500-001-293 Power System4 - Battery 24V DC NiCd - SMRT™ Power System - Charger 120V/240Vac or 12V DC - SMRT™ Power System Standards (Cots and Chargers) IEC 60601-1 CAN/CSA-C22.2 No. 601.1-M90 UL 60601-1 IEC 60601-1-2:2001 KKK-A-1822 1 Height measured from bottom of mattress at seat section to ground level. Dear Customer, Alternatively, if you do not have a REF, EAN/GTIN, or KeyCode, you may search by product description and division, if known. Please type the product description below and choose the division, if known, using the drop-down optio