The PS-30M includes a high resolution graphical meter to adjust settings and display logged data with the capability to store up to 256 days of data logging. The PS-30M also features advanced programmable lighting controls and enhanced surge rating for heavy DC loads. The 100% solid state PS-30M controller has an estimated service life of 15 years. entire manual to ensure best performance and years of trouble-free service. 1. Mount the ProStar to a vertical surface. Allow space above and below the controller for air flow. The heatsink MUST be in a vertical (up & down) position. 2. Make sure the PV and load currents will not exceed the ratings of the ProStar model being installed. The ProStar line of controllers set new standards for reliability and self-diagnostics. The new ProStar is available in 15 or 30 amps, 12/24 or 48 volt, and negative or positive ground. The controller may be paralleled for a solar input rating of up to 300 amps. An optional meter provides an extensive display of self-testing and system status. The Morningstar ProStar 30 (PS-30M-PG) is commonly used for small to medium off grid and other battery systems, such as backup power supplies. It can be used for any 12 or 24 volt battery system. It will handle up to 30 amps from the solar panels - about 500 watts of panel at 12 volts, 1000 watts at 24 volts. Unboxing of a new charge controller for solar system.Link for extra info: infinigi.com/morningstar-ps30m-prostar-30-charge-controller-meter-p-827. The ProStar 30M mid-range solar controller for both professional and consumer applications. Longer battery life, and constant voltage PWM series regulation using a 4-stage charging algorithm. Model PS-30M, Generation 3. Morningstar ProStar Spec Sheet: Manual: MorningStar ProStar Manual: Volts: 12/24 V: Amps: 30 A: Options: LVD & Temp The ProStar line of controllers set new standards for reliability and self-diagnostics. The new ProStar is available in 15 or 30 amps, 12/24 or 48 volt, and negative or positive ground. The controller may be paralleled for a solar input rating of up to 300 amps. An optional meter provides an extensive display of self-testing and system status. Morningstar ProStar PS-30M Charge Controller 30 amp, 12 or 24 volt charge controller with meter. 100% solid state with very low voltage drops. Capable of overloads up to 25% with a 5 year warranty. LED's indicate battery status and faults. 15 year estimated product life. Settings for Lead Acid, Gel, and Flooded batteries. Manufacturer Part#: PS-30M. The ProStar solar charge controller has been the leading mid-range pulse width modulation (PWM) controller since 1995. With over 350,000 units installed in the harshest environments in over 100 countries, the ProStar has developed a strong reputation for reliable performance. This third generation ProStar maintains the More info and purchase link: bit.ly/1N2ux63These are the Top of the line in charge controllers for small systems. The ProStar 30 features intelligent The ProStar solar charge controller has been the leading mid-range pulse width modulation (PWM) controller since 1995. With over 350,000 units installed in the harshest environments in over 100 PS-30: 30 amp-no meter PS-30M: 30 amp with meter. Created Date: 3/21/2019 7:29:02 PM The ProStar solar charge controller has been the leading mid-range pulse width modulation (PWM) controller since 1995. With over 350,000 units installed in the harshest environments in over 100 PS-30: 30 amp-no mete