Computer Aided Design (CAD) construction and design drawings for the Forest Service. The purpose of this document is to establish standards, which will result in the preparation of consistent and compatible AutoCAD files. It is intended to guide users in the overall CAD system, operations, and to establish standards and procedures that will A/E/C Standards. The A/E/C CAD Standard and A/E/C Graphics Standard documents have been developed by the CAD/BIM Technology Center to eliminate redundant Computer-Aided Design (CAD) standardization efforts within the Department of Defense (DoD) and the Federal Government. These documents are part of an initiative to develop a nonproprietary CAD The United States National CAD Standard® (NCS) is comprised of The American Institute of Architect's CAD Layer Guidelines, the Construction Specification Institute's Uniform Drawing System (Modules 1-8), and the National Institute of Building Sciences BIM Implementation & Plotting Guidelines. The NCS coordinates these publications to allow The National CAD Standard version 6.0 has been out for a while and the powers that be are starting to request that projects are submitted in conformance to NCS 6.0. Customers asked for NCS 6.0 support. The two new NCS 6.0 AddOns for Release 7 fix that. They allow customers to preview. test, and employ the new Release 8 Layer scheme as well. CAD Standard (NCS) published by the National Institute of Building Sciences in 2001. NCS incorporates the efforts of the American Insti-tute of Architects (AIA) and its CAD Layer Guidelines as well as the Construction Specifications Institute (CSI) and its Uniform Drawing System. As an organization with contributing members on the NCS Committee, Management (CFM) published the VHA National CAD Standard Application Guide ("Application Guide") in May 2006 and therein adopted the United States National CAD Standard® (NCS), amending portions of the NCS for specific VA needs. At the time of the Application Guide's publishing, the NCS was in version 3.1. VHA NATIONAL CAD STANDARD APPLICATION GUIDE May 2006 6 Sheet Naming Components Level 1 Discipline Discipline Designator Level 2 Discipline Level 2 Designator Sheet Type* Sheet Type Designator* Operations O User Defined J & K * *Can be used with all Disciplines Sheet Numbers The goals for Cadastral Data Content Standard are: 1. To provide common definitions for cadastral information found in public records, which will facilitate the effective use, understanding, and automation of land records, 2. To provide suggested attribute values, which will enhance data sharing, 3. STANDARD SHEET IDENTIFICATION • Level 2 Discipline Designator Optional • Hyphen Must Follow Discipline Designator NCS: CSI'S UNIFORM DRAWING SYSTEM (UDS) ** SHEET IDENTIFICATION A(A) - NNN Discipline Designators (Levels 1 & 2) AA - NNN Sheet Type Designator AA -NNN Sheet Sequence Number A = Alphabetical character N = Numerical character 01-11-2017 06:54 AM. Currently, ACADE does not conform to the National Cadd Standard, as far as I'm aware. This is mainly due to how ACADE manages its layersthe naming conventions won't match at all. ACADE can be made to work within the NCS, I suppose, but you would have to rename all of the layers to conform. The A/E/C Computer-Aided Design (CAD) Standard has been developed by the CAD/ Building Information Modeling (BIM) Technology Center (hereafter referred to as the Center) for