Extremely simple to use; testing starts automatically without touching a single button. Simultaneous testing of up to ten instruments. GALAXY GX2 System is optimized for use with MSA's XCell Sensors; provides up to 50% cost of ownership reduction. At-a-glance indicators include low calibration gas volume, expiration warnings and test stand How to Set Up the Galaxy GX2? To connect the unit, ensure that all 5 barb fittings on the left-hand side of the test stand line up with the cylinder holder. Press the 2 units together until the barb fittings are fully inserted and the flange screw holes align. Insert the 3 screws provided to ensure a secure connection. Specifications. Material: Acrylonitrile butadiene ABS. Dimensions (L x W x D): 11.8 in x 6.5 in x 7.9 in. Operating Temperature Range: 32℉ to +104℉. Power Module: 100-240 VAC, 47-63 Hz. Optional Vehicle Power Module: 9-32 VDC. NOTE: Test Stand Only (No Charging). This is NOT the complete GX2 Testing System. Clearance. This properly aligns the instrument in the test stand. (7) Ensure the GALAXY GX2 is set in the desired test mode. Refer to the GALAXY GX2 Configuration [ chapter 4.5] in the Setup section of this manual. GALAXY GX2 57 MSA Troubleshooting 6.2 6.3 Instrument Fails Zero Calibration or Bump (1) Check the Fresh Air filter and replace if contaminated. The GALAXY GX2 Automated Test System provides simple, intelligent testing and calibration of MSA ALTAIR® and ALTAIR PRO Single-Gas Detectors and ALTAIR 4X and ALTAIR 5X Multigas Detectors. Easy-to-use automated test stand offers high performance as either stand-alone unit or integrated portable detector management system, enabling total data USD $3,975.00. GALAXY GX2, Test Stand, Altair, Station Automated Calibration System, configured to include (4) Valve / (1) Cylinder Ports, & Standard Components (Pre-configured Plugs, Barbs, Fresh Air Filter, Power Supply with corresponding Plug & Spare Parts Kit, Ethernet Cable & Screen Protector, Portable Instrument, MSA. Option. Choose an ALTAIR 4/4X/4XR Test Stand, Four Valves, w/ Single Unit Charger (Model #10128629) This is the multi-valve test stand with 4 valves designed for the ALTAIR 4 family of gas detectors made by MSA Safety. These test stands offer high performance as stand-alone units where each test stand can accommodate one gas detector of the ALTAIR 4 family. MSA Galaxy GX2, ALTAIR 4/4X/4XR Test Stand, Four Valve, w/Single Unit Charger. Add to Cart MSA Galaxy GX2, ALTAIR 4/4X/4XR Test Stand, Four Valve, Instruction Manual PDF Quick Start PDF Details. MSA Safety's ALTAIR 5, 5X, & 5XR Test Stand, Four Valves, w/ Single Unit Charger (Model MSA GALAXY® GX2 Automated Test System provides simple, intelligent testing and calibration of MSA ALTAIR® and ALTAIR PRO Single-Gas Detectors and ALTAIR 4X and ALTAIR 5X Multigas Detectors. Easy-to-use automated test stand offers high performance as either stand-alone unit or integrated portable detector management system, enabling total data Specifications. Material: Acrylonitrile butadiene ABS. Dimensions (L x W x D): 11.8 in x 6.5 in x 7.9 in. Operating Temperature Range: 32℉ to +104℉. Power Module: 100-240 VAC, 47-63 Hz. Optional Vehicle Power Module: 9-32 VDC. NOTE: Test Stand Only (No Charging). This is NOT the complete GX2 Testing System. Country Of Origin.