The Cortex Microcontroller Software Interface Standard (CMSIS) is a vendor-independent hardware abstraction layer for the Cortex-M processor series and defines generic tool interfaces. The CMSIS enables consistent device support and simple software interfaces to the processor and the peripherals, simplifying software re-use, reducing the learning curve for microcontroller developers, and User Manual GD-Link Adapter 2 / 13 1 Introduction GD-Link adapter is a three-in-one multi-function development tool for GD32 series of MCUs. It provides CMSIS-DAP debugger port withJTAG/SWD interface . User can use GD-Link adapter for online programming or debug code in compatible IDE such as Keil or IAR. Another This user manual is intended for developers who use STM32Cube firmware on STM32 microcontrollers and microprocessors. It provides a full description of how to use the common APIs provided by the CMSIS-OS wrapping layer. In the STM32Cube firmware FreeRTOS™ is used as real-time operating system through the generic CMSIS-OS The attached guide walks through how to port the CMSIS-NN inference engine to the LPC55S69 family. Similar steps can be done to port eIQ to other microcontroller devices. This guide is made available as a reference for users interested in exploring eIQ on other devices, however only the RT1050 and RT1060 are officially supported at this time CMSIS-CORE implements the basic run-time system for a Cortex-M device and gives the user access to the processor core and the device peripherals. In detail it defines: Cortex-M7 Devices Generic User Guide; Tested and Verified Toolchains. The CMSIS-CORE Template Files supplied by ARM have been tested and verified with the following CMSIS-DAP 2.0 Debugger User Guide PM050A01 rev 0.0 7.March.2021 . CMSIS-DAP for XStream Adapters USER GUIDE 2021 elprotronic.ca P a g e | I Elprotronic Inc. 35 Austin Rumble Court King City Ontario, L7B0B2 CANADA Web site: elprotronic.com E-mail: info@elprotronic.com Fax: 905-539-0474 This user manual describes the CMSIS DSP software library, a suite of common signal processing functions for use on Cortex-M processor based devices. The library is divided into a number of functions each covering a specific category: The library has separate functions for operating on 8-bit integers, 16-bit integers, 32-bit integer and 32-bit A project for ADuCM360 can be created using the New CrossCore Project Wizard. This wizard will guide you through the steps to create a new project. To create a new project, go to the menu bar and find File → New → CrossCore Project. Name the project, and then hit the Next button. Choose Processor family ARM and select Processor type ADuCM360. User manual Rev. 1.0 — 13 September 2021 3 of 15 NXP Semiconductors UM11673 MCU-Link Pro 1. Introduction Jointly developed by NXP and Embedded Artists, MCU-Link Pro is a powerful and cost effective debug probe that can be used seamlessly with MCUXpresso IDE, and is also compatible with 3rd party IDEs that support CMSIS-DAP protocol. Programming manual STM32 Cortex®-M4 MCUs and MPUs programming manual Introduction This programming manual provides information for application and system-level software developers. It gives a full description of the STM32 Cortex®-M4 processor programming model, instruction set and core peripherals. The applicable products are listed in the table DAPLink implement a bootloader with USB MSD, which made it very easy for the firmware upgrade. short the nRST and GND. plug the DAPLink into PC US